Digital Volumetric Analysis of CAD/CAM Polymeric Materials after Tooth Brushing

Cristian Abad-Coronel; Andrea Palomeque; Nancy Mena Córdova; Paulina Aliaga

doi:10.3390/polym14173499

Digital Volumetric Analysis of CAD/CAM Polymeric Materials after Tooth Brushing

Cristian Abad-Coronel, Andrea Palomeque, Nancy Mena Córdova, Paulina Aliaga

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

The objective of the study was to evaluate the volumetric wear of four composite materials for CAD/CAM (computer-aided design/computer-aided manufacturing) systems. The materials evaluated were: Cerasmart (CER), Shofu Block HC (SBH), Tetric CAD (TEC) and Brava (BRA). All the samples (n = 40) were subjected to simulated brushing (100,000 cycles). Wear was evaluated by superimposing pre-and post-brushing scans obtained with an intraoral optical scanner (CEREC Primescan; Dentsply Sirona, Germany), which were subsequently imported into the OraCheck software 5.0 (Dentsply Sirona, Germany). The data were analyzed by ANOVA test and Tukey’s HSD test was used for multiple comparisons. Cerasmart showed the least wear after brushing. All the tested materials exhibited mass loss.

Original language	English
Article number	3499
Journal	Polymers
Volume	14
Issue number	17
DOIs	https://doi.org/10.3390/polym14173499
State	Published - Sep 2022

Keywords

CAD/CAM
composite
simulated brushing
volumetric analysis
wear test

Access to Document

10.3390/polym14173499

Cite this

@article{da3de25a9f8441cabd8cf27bc8bc8fff,

title = "Digital Volumetric Analysis of CAD/CAM Polymeric Materials after Tooth Brushing",

abstract = "The objective of the study was to evaluate the volumetric wear of four composite materials for CAD/CAM (computer-aided design/computer-aided manufacturing) systems. The materials evaluated were: Cerasmart (CER), Shofu Block HC (SBH), Tetric CAD (TEC) and Brava (BRA). All the samples (n = 40) were subjected to simulated brushing (100,000 cycles). Wear was evaluated by superimposing pre-and post-brushing scans obtained with an intraoral optical scanner (CEREC Primescan; Dentsply Sirona, Germany), which were subsequently imported into the OraCheck software 5.0 (Dentsply Sirona, Germany). The data were analyzed by ANOVA test and Tukey{\textquoteright}s HSD test was used for multiple comparisons. Cerasmart showed the least wear after brushing. All the tested materials exhibited mass loss.",

keywords = "CAD/CAM, composite, simulated brushing, volumetric analysis, wear test",

author = "Cristian Abad-Coronel and Andrea Palomeque and {Mena C{\'o}rdova}, Nancy and Paulina Aliaga",

note = "Publisher Copyright: {\textcopyright} 2022 by the authors.",

year = "2022",

month = sep,

doi = "10.3390/polym14173499",

language = "Ingl{\'e}s",

volume = "14",

journal = "Polymers",

issn = "2073-4360",

number = "17",

}

TY - JOUR

T1 - Digital Volumetric Analysis of CAD/CAM Polymeric Materials after Tooth Brushing

AU - Abad-Coronel, Cristian

AU - Palomeque, Andrea

AU - Mena Córdova, Nancy

AU - Aliaga, Paulina

PY - 2022/9

Y1 - 2022/9

N2 - The objective of the study was to evaluate the volumetric wear of four composite materials for CAD/CAM (computer-aided design/computer-aided manufacturing) systems. The materials evaluated were: Cerasmart (CER), Shofu Block HC (SBH), Tetric CAD (TEC) and Brava (BRA). All the samples (n = 40) were subjected to simulated brushing (100,000 cycles). Wear was evaluated by superimposing pre-and post-brushing scans obtained with an intraoral optical scanner (CEREC Primescan; Dentsply Sirona, Germany), which were subsequently imported into the OraCheck software 5.0 (Dentsply Sirona, Germany). The data were analyzed by ANOVA test and Tukey’s HSD test was used for multiple comparisons. Cerasmart showed the least wear after brushing. All the tested materials exhibited mass loss.

AB - The objective of the study was to evaluate the volumetric wear of four composite materials for CAD/CAM (computer-aided design/computer-aided manufacturing) systems. The materials evaluated were: Cerasmart (CER), Shofu Block HC (SBH), Tetric CAD (TEC) and Brava (BRA). All the samples (n = 40) were subjected to simulated brushing (100,000 cycles). Wear was evaluated by superimposing pre-and post-brushing scans obtained with an intraoral optical scanner (CEREC Primescan; Dentsply Sirona, Germany), which were subsequently imported into the OraCheck software 5.0 (Dentsply Sirona, Germany). The data were analyzed by ANOVA test and Tukey’s HSD test was used for multiple comparisons. Cerasmart showed the least wear after brushing. All the tested materials exhibited mass loss.

KW - CAD/CAM

KW - composite

KW - simulated brushing

KW - volumetric analysis

KW - wear test

UR - http://www.scopus.com/inward/record.url?scp=85137790359&partnerID=8YFLogxK

U2 - 10.3390/polym14173499

DO - 10.3390/polym14173499

M3 - Artículo

AN - SCOPUS:85137790359

SN - 2073-4360

VL - 14

JO - Polymers

JF - Polymers

IS - 17

M1 - 3499

ER -

Digital Volumetric Analysis of CAD/CAM Polymeric Materials after Tooth Brushing

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this