Shear assessment of solid slab bridges

E. O.L. Lantsoght, C. Van Der Veen, J. C. Walraven

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

6 Citas (Scopus)

Resumen

The capacity of solid slab bridges in shear is assessed by comparing the design beam shear resistance to the design value of the applied shear force due to the permanent actions and traffic loads. The transverse distribution of loads which occurs in slabs is thus not taken into account. Experiments on slabs under concentrated loads are carried out at Delft University of Technology. The results of these experiments are the basis for recommendations for the assessment of solid slab bridges. A slab factor and a horizontal load spreading method to determine the effective width are proposed. Preliminary results from an additional series of experiments confirm the hypothesis of superposition.

Idioma originalInglés
Título de la publicación alojadaConcrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012
Páginas827-833
Número de páginas7
EstadoPublicada - 2012
Publicado de forma externa
Evento3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012 - Cape Town, Sudáfrica
Duración: 3 sep. 20125 sep. 2012

Serie de la publicación

NombreConcrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012

Conferencia

Conferencia3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012
País/TerritorioSudáfrica
CiudadCape Town
Período3/09/125/09/12

Huella

Profundice en los temas de investigación de 'Shear assessment of solid slab bridges'. En conjunto forman una huella única.

Citar esto