Strength resistance factors for seismic design of exposed based plate connections in special steel moment resisting frames

Pablo Torres-Rodas, Jawad Fayaz, Farzin Zareian

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

12 Citas (Scopus)

Resumen

This study presents a critical assessment of the reliability of current base plate connections in steel special moment resisting frames (SMRFs). Using a probabilistic outlook, this research evaluates the reliability of exposed column base (ECB) connections in SMRFs designed based on the current seismic design provisions; it suggests (and implements) a statistical approach to compute resistance factors for three modes of failure (concrete bearing, base plate yielding at tensile interface, and anchor bolt fracture) of ECB connections to achieve a target reliability index, β, of 4.5. Since ECB connections are limited to short buildings, therefore, this study is conducted on two-story and four-story SMRFs which are analyzed using a suite of 120 ground motions originating from strike-slip and reverse faults. ECB connections for the two-story building are designed to simulate pinned connection, while the bases of the four-story building represent moment connections. Detailed methodology for calculating the β of ECB connections is presented considering the three limit states in a moment–axial load interaction curve. Results indicate that the implementation of current seismic provisions results in β ~ 3.3 for non-moment resisting ECB connections for all tried combinations of resistance factors. For moment resisting ECB connections, however, only the designs based on a resistance factor for concrete bearing failure mode less than the current 0.65 result in an acceptable reliability factor of β > 4.5.

Idioma originalInglés
Páginas (desde-hasta)537-553
Número de páginas17
PublicaciónEarthquake Spectra
Volumen36
N.º2
DOI
EstadoPublicada - 1 may. 2020

Huella

Profundice en los temas de investigación de 'Strength resistance factors for seismic design of exposed based plate connections in special steel moment resisting frames'. En conjunto forman una huella única.

Citar esto